Publicidad
Idiomas disponibles
Idiomas disponibles
• If you are not using the machine in your work area, or if you are transporting it to another work
location (e.g. in cars), then disassemble it and pack it in its original packaging.
• For practical reasons, cutting discs must always be transported in a container. On the one hand, this
protects the cutting discs from damage and on the other hand, the user is protected from cuts.
STORAGE
• Allow the cleaned machine to dry completely.
• Store the appliance and its accessories in a dark, dry, frost-free place. Always store the tool in a place
that is inaccessible to children. The ideal storage temperature is between 10 and 30°C.
• Always store the machine in its original packaging, if possible.
9. TROUBLE SHOOTING
Problem
1. Motor not running.
2. Motor runs, cutting
disc remains still.
3. Cutting disc runs
irregularly/vibrates.
4. Cutting disc is
discoloured.
10. DISPOSAL AND RECYCLING
The equipment is supplied in packaging to prevent it from being damaged in transit. The raw materials
in this packaging can be reused or recycled.
The equipment and its accessories are made of various types of material, such as metal and plastic.
Defective components must be disposed of as special waste. Ask your dealer or your local council.
For EU countries only
Never dispose of any electric power tools with your household refuse. To comply with
European Directive 2012/19/EU on waste electric and electronic equipment, and its
implementation in national laws, old electric power tools must be separated from other
waste and disposed of in an environment-friendly fashion, e.g. by taking them to a
recycling depot.
Recycling alternative to returns
As an alternative to returning the equipment to the manufacturer, the owner of the electrical
equipment must make sure that the equipment is properly disposed of if he no longer wants to keep
the equipment.
Old equipment can be returned to a suitable collection point that will dispose of the equipment in
accordance with national recycling and waste disposal regulations.
Electric and electronic equipment can be hazardous for the environment and for human health since
they contain hazardous substances.
This does not apply to any accessories or aids without electrical components supplied with the old
equipment.
Possible reason
• No mains voltage.
• Flange nut loose.
• Cutting disc warped.
• Insufficient cooling water.
• Lateral friction caused by cut
runout.
Remedy
• Check cable, plug, socket and fuse.
correctly and tighten if necessary.
• Replacing the cutting disc.
• Fit the cutting disc correctly.
• Fill the product with water.
• Guide workpiece through cutting
disc more slowly.
140
FR
ES
PT
IT
EL
PL
UA
RO
EN
Publicidad
