Audizio 102.300 Manual De Instrucciones página 8

If there is Digital Audio Broadcasting (DAB) in your area, the Radio can pick up the DAB stations as well. The radio supports
both DAB and DAB+.
Place the radio close to the window and extend the antenna as far as it can go to get the best reception. Sometimes you may
need to adjust the direction of the antenna to improve reception.
Press [Source] to select DAB mode. The first time DAB mode is selected, the unit will automatically search for available
stations.
Auto scan: Press [Scan] on the remote or press and hold [Menu/Info] on the unit and select "Full scan" to automatically scan
for available DAB stations. After completing the automatic scan, the unit will start playing the first found station. Rotate
[Volume] to adjust the volume level when playback is active.
Manual scan: Press [Menu] on the remote or press and hold [Menu/Info] on the unit and select "Manual scan" to manually
scan for available DAB stations. Rotate [Select] to select the desired channel and press [Select] to confirm.
Station presetting - unit: While playing in DAB mode, press and hold [Preset 4+]. Press [Previous] or [Next] to select the
desired preset slot (1-20), press [Select] to store. Pressing and holding [Preset 1-3] will quickly save the current station to
that preset slot.
Press [Preset 4+] to recall memory. Press [Previous] or [Next] to select the stored station you want to listen to. Press [Select]
to confirm. If stations are saved in slot 1, 2 or 3, it's possible to quickly recall them by pressing [Preset 1-3].
Station presetting - remote: When listening to a station, press and hold [Memory] to access preset control, the display will
flash. Press [Preset up] or [Preset down] to select a desired preset slot. Press [Select] to confirm the save.
Show channel information: Press [Menu/Info] repeatedly to show various forms of information regarding the station that is
being played.
To receive the ordinary FM stations (no internet connection is required), place the radio close to a window and extend the
antenna as far as it can go to get the best reception. You may need to adjust the direction of the antenna to improve
reception.
Press [Source] to select FM mode.
Auto scan: Press [Scan] on the remote to automatically scan for available FM stations. After completing the automatic scan,
the unit will start playing the first found station. Rotate [Volume] to adjust the volume level when playback is active.
Manual scan: Press [Previous] or [Next] or rotate [Select] on the unit to change stations manually.
Station presetting - unit: While playing in FM mode, press and hold [Preset 4+]. Press [Previous] or [Next] to select the
desired preset slot (1-20), press [Select] to store. Pressing and holding [Preset 1-3] will quickly save the current station to
that preset slot.
Press [Preset 4+] to recall memory. Press [Previous] or [Next] to select the stored station you want to listen to. Press [Select]
to confirm. If stations are saved in slot 1, 2 or 3, it's possible to quickly recall them by pressing [Preset 1-3].
Station presetting - remote: When listening to a station, press and hold [Memory] to access preset control, the display will
flash. Press [Preset up] or [Preset down] to select a desired preset slot. Press [Select] to confirm the save.
Show channel information: Press [Menu/Info] repeatedly to show various forms of information regarding the station that is
being played.
When in DAB mode, press [Menu] to access the DAB menu. Rotate [Select] on the unit, or press [Previous] or [Next] on the
remote control to scroll through different options.
Dynamic Range Control (DRC): DRC can make quieter sounds easier to hear when the unit is used in a noisy environment. The
DRC level of a broadcast is set by the broadcaster and is transmitted with the service. Changing the DRC value on the unit
enables you to apply a scaling factor to this level. Choose between 3 levels of compression:
DRC high: Maximum compression as sent with the transmitted service.
DRC low: Set to ½ that of the sent transmitted service.
DRC off: No compression.
Press [Menu]. Rotate [Select] until "DRC" is displayed, press [Select] to proceed.
Rotate [Select] to set the desired DRC value and press [Select] to confirm.
Press [Menu] to exit the menu.
Prune: This function allows the user to erase/remove inactive stations.
Press [Menu]. Rotate [Select] until "Prune" is displayed, press [Select] to proceed.
Rotate [Select] to select "Yes" and press [Select] to confirm.
Press [Menu] to exit the menu.
8