Audizio 102.300 Manual De Instrucciones página 9

Language: This function allows for changing language.
Press [Menu]. Rotate [Select] until "Language" is displayed, press [Select] to proceed.
Rotate [Select] to select the desired language and press [Select] to confirm.
Press [Menu] to exit the menu.
Stereo/Forced mono selection: When listening to an FM radio station, press [FM ST.] on remote to switch between stereo-
and forced mono audio.
When in FM mode, press [Menu] to access the FM menu. Rotate [Select] on the unit, or press [Previous] or [Next] on the
remote control to scroll through different options.
Scan setting: This function allows to choose to scan for all stations or strong stations only.
Press [Menu]. Rotate [Select] until "Scan setting" is displayed, press [Select] to proceed.
Rotate [Select] to select either "All stations" or "Strong stations" and press [Select] to confirm.
Press [Menu] to exit the menu.
When "Strong stations" has been selected, the next time an FM scan has been initiated, the unit will only search for strong
stations and will leave the weak stations.
Audio setting: This menu allows for choosing between stereo- and forced mono audio.
Press [Menu]. Rotate [Select] until "Audio setting" is displayed, press [Select] to proceed.
Rotate [Select] to select either "Stereo allowed" or "Forced mono" and press [Select] to confirm.
Press [Menu] to exit the menu.
Loading and playing CD's: Insert the CD label-side facing front. The unit will display "Reading" for multiple seconds. Press
[Play/pause] to start playback.
Reading and playing USB: Insert a USB drive into the USB slot. Press [CD/USB] on the remote or [Source] on the unit to enter
USB mode. The total tracks stored on the USB drive will appear on the display. Press [Play/pause] to start playback.
Direct select track: press numeric buttons from the num pad of the remote to directly select tracks from CD or USB. Press any
number and confirm with [Select] to jump to that specific track.
Programmed playback: This unit can be programmed to play a sequence of tracks selected.
Insert a disc and in stop mode press [Memory] on remote. "P-01" and "T-01" are shown with "01" of "T-01" flashing.
Press the [Previous] or [Next] button to select the desired track.
Press [Memory] on remote to save the desired track to the desired play slot. Repeat steps 2-4 to program up to 20 tracks for
CD and up to 99 tracks for MP3.
Press [Play/pause] to start playing the programmed sequence.
To clear the program, press [Stop] twice or change to another mode.
Before transmission between your BT device and the radio is possible, both devices must be coupled. This process is called
"pairing". The radio is served as a receiver, to receive the music stream to be played on the radio.
If you have already coupled to a BT device before, this connection will be restored automatically when both devices are in
range and BT operation has been selected on the radio. "Pairing" does not have to be repeated. This function may need to be
activated in your BT device, however.
• Press [Source] to enter BT mode.
• Turn on BT streaming on your device. The device will scan for pairable BT devices in the reception range.
• Select "Audizio Cannes" from the list with found devices. Enter "0000" if a pass code is required.
• Start playback on your BT device. Playback now takes place emitting sound from the radio.
You can listen to the music stored in other audio device or smart phone via the radio, through the connection to the 3.5 mm
aux-in jack on the rear side. Use a cable with 3.5 mm pins at both ends, one end connected to the aux-in jack on the radio, the
other end connected to the earphone jack on the audio device (or line out socket if available).
Press [Source] to choose AUX mode. Play music on the connected device, the sound will be emitted from the radio.
This function allows programming the device to switch into standby mode by itself after a set period of time.
Press [Sleep] repeatedly to set the desired sleep time. When the timer reaches zero, the unit will go in standby mode
automatically. To cancel the sleep timer, press [Sleep] repeatedly to select "Sleep off".
9