Publicidad
Temperature control
• To increase the temperature turn the temperature regulator
clockwise; to decrease the temperature turn it counterclockwise.
Flow and temperature parameters
• According to the slide switch for on/off and the
temperature regulator, the following parameters can be
obtained in order to get the best result on your work.
Slide
switch
Flow (L/min)
Temperature
control
113 ºF - 392 ºF 113 ºF - 932 ºF
(min-max)
Recommendation for use of nozzles and accessories
Icon
Description
Spraying nozzle
Hook nozzle
Reduction nozzle
Deflecting nozzle
Caulking sheets
Cleaning and Care
• Keep the ventilation slots unobstructed at all times to
guarantee an adequate motor cooling.
• Inspect regularly all the mounting screws. Verify they are
correctly threaded. If a screw is loose, tighten immediately.
8
ENGLISH
Level 1
Level 2
500 - 600
700 - 800
Objective
For drying, paint stripping, plastic shaping, welding canvas
over a wide area
Pipe welding
For welding and concentrated, aimed stream of hot air
For drying, defrosting (heat diffused over a large area)
For scraping and removing material such as paint or glue,
applying material such as tar or wax, or holding the workpiece
to which heat is applied
Start Up
45 ºC
-
(Included)
Maintenance
Service
• Servicing the tool shall only be carried out in a
Authorized Service Center. Service
and maintenance carried out by non-qualified personnel
can be dangerous and could cause personal injury and
cancels the product's Warranty.
500 ºC
CONTROL DE
TEMPERATURA
+
Publicidad
