Descargar Imprimir esta página

Aquona VYRTA Direct Flow Manual De Instrucciones página 46

Publicidad

Idiomas disponibles

Idiomas disponibles

DATA SHEET
1. TECHNICAL CHARACTERISTICS
APPLICATION
Water treatment
Osmosis Vyrta by Aquona
Use
Improvement of the characteristics of drinking water (which complies with the requirements of the European Di-
rective on water for human consumption 98/83 or its national transpositions in the different member states of the
European Community).
Modifications by reduction or contribution
• Water treatment by reverse osmosis is able to reduce concentrations of salts and other substances in high per-
centages.
• Minimum reduction* of certain compounds and parameters:
Sodium: 90%.
Calcium: 90%.
Sulfate: 90%.
Chloride: 90%.
Total hardness: 90%.
Conductivity: 90%.
* Depending on the characteristics of the water to be treated (at the outlet of the membrane). These values may vary
depending on the type of post-filter that incorporates the equipment and / or regulation of the mixing valve (in case
it is included).
OPERATING LIMITS
Pressure (max./min.):
TDS (max.):
Temperature (max./min.):
Hardness (max.):
Type of control:
Security system:
Dimensions (W x B x C in mm):
Weight (in kg, including all accesses):
Input connection:
Drain connection:
Tap connection:
Wall adapter:
Drain collar:
Data sheet
EQUIPO CON BOMBA
4 bar - 1 bar (400kPa-100kPa).
1500ppm.
38 ºC - 5 ºC.
15 ºHF. **
Flow sensor.
Input control by solenoid valve.
Flushing solenoid valve
Minimum pressure switch.
Electronic leak sensor.
Water quality control.
Maintenance notice.
249 x 250 x 461.
12,45.
3/8".
1/4".
1/4".
3/8" M-F. *****
Tube clamp
40 mm drain.
A
1
2
3
4
5
C
B
1. Entrance
2. Osmotic water
3. Drainage
4. Electronic faucet
5. Food

Publicidad

loading

Productos relacionados para Aquona VYRTA Direct Flow