Publicidad
Idiomas disponibles
Idiomas disponibles
COMPONENT NAMES (continued)
Remote Control
In addition to controlling all of the functions on your Hitachi UT LCD Monitor, the new remote control is designed to operate
different types of devices, such as, DVD players, Cable Boxes, Set-Top-Boxes, Satellite Receivers, VCR's, PVR's and AVR's.
The remote control must be programmed to control the chosen device. Please refer to pages
programming setup.
Power On/Off
(Monitor, TV, DVD, PVR/VCR, SAT/CBL, AVR)
Press this button to switch the selected device
On or Off standby.
(-) Dash Button
(TV, SAT,PVR,DVD)
Press this button when the remote is in Set-
Top-Box mode (SAT) or when the TV uses a
digital input.
Last Channel Button
(TV, SAT/CBL, PVR)
Press this button to switch between the
current and the last channel viewed.
Volume Buttons
(Monitor, TV, AVR)
Press up (+) to increase or down (-) to
decrease the audio level of your TV.
Menu Button
(Monitor, TV, DVD, PVR/VCR, SAT/CBL, AVR)
Accesses the OSD menu system.
Return Button
(Monitor, TV,DVD, PVR/VCR, SAT/CBL, AVR)
Press this button to return to the previous menu.
Cursor PAD/OK Buttons
(Monitor, TV, DVD, PVR/VCR, SAT/CBL, AVR)
The Cursor PAD is used to navigate through
the OSD and INPUT menu system, The OK
button is used to Set/Activate highlighted
menu items.
Macro Learning Buttons (M1~M4)
(Monitor, TV, SAT/CBL)
Use this buttons to program up to 10 key
button sequence per macro button.
Input Select
(Monitor, TV, AVR)
Press this button to change input mode.
HDMI
RGB (/Composite)
RGB Input Select
(Monitor)
Press this button to select RGB (/Composite)
input.
DVD/VCR CONTROL BUTTONS
(DVD, PVR/VCR, AVR)
Control the functions of your DVD and VCR.
LEGENDS
TV - Television
DVD- Digital Video Disc Player
AVR - Audio/Video Receiver
NOTE
Pressing any button will illuminate the backlight for 4 seconds.
TV Mode is used for LCD Monitor. Please notice that NOT all keys are available for this LCD Monitor, the only working keys
are the ones marked as Monitor in parenthesis, since other ones are available when equipped with Hitachi Set-Top-Box and
Monitor is used as a TV.
For the Record button there is a feature for safety; so this key have to be press twice in order to start recording.
All manuals and user guides at all-guides.com
VCR - Video Cassete Recorder
SAT - Satellite Receiver
25
28
~
for external device
Device Buttons
(TV, DVD, PVR/VCR,
SAT/CBL, AVR)
Press these buttons to switch between your
devices.
Numeric Buttons
(TV, DVD, PVR/VCR, SAT/CBL, AVR)
Press these buttons to manually enter
the channel and for numeric entry when
navigating through the OSD menu system.
Enter Button
(TV, DVD, VCR, SAT/CBL)
Press this button to use as a SELECT feature.
Channel Up/Down Buttons
(TV, PVR/VCR, SAT/CBL)
Changes up or down the channel.
Mute
(Monitor, TV, AVR)
Press this button once to turn off temporally
the audio level, press it again to restore audio
level.
Guide Button
(SAT/CBL, PVR,DVD)
Press this button to access the program guide
of TV and other devices.
Info Button
(Monitor, TV, DVD,SAT/CBL, PVR)
Shows the input signal status and other
information.
Picture Mode
(Monitor, TV)
Picture mode can be changed each time
pressed in the following sequence.
Dynamic
Natural
Cinema
Favorite Channel Button
(TV,SAT/CBL, PVR)
Press to enter/access Favorite Channel mode.
Aspect
(Monitor, TV)
Press this button to change picture size.
HDMI Input Select
(Monitor)
Press this button to select HDMI input.
PVR - Personal Video Recorder
CBL - Cable Box
16
Publicidad
