Publicidad
Idiomas disponibles
Idiomas disponibles
Always wear resistant shoes with non-slip sole that
completely covers the foot. Never work barefoot or in
sandals, for example.
In case of nausea, headaches, sight problems (e.g.
reduced vision), hearing problems, dizziness and
reduced
ability
to
immediately.
Plan rest breaks when using the cordless split brush
cutter and avoid using it for long periods. Permanent
vibrations are harmful to health.
Do not attempt to remove the wrapped material from
the cutting attachments and respective guards while
the motor is running or the blade is rotating. Stop the
motor, remove the batteries and wait for the cutting
attachments to stop before removing material wrapped
around the blade shaft or mowing head.
Operating the power tool causes a massive load
of vibrations may damage nervous and circulatory
systems, especially to whom have circulatory disorders.
Inform your doctor if any symptoms arise caused by the
vibrations. Among these symptoms, that occur specially
on fingers, hand and wrists, are also included loss of
sensation, pain, muscle weakness, skin discoloration or
tingling sensation.
The control and safety devices installed must not be
removed or inhibited.
Maintenance and cleaning
When carrying out any cleaning, adjustment, repairing
or maintenance tasks, wear gloves and place the
cordless brush cutter in a firm and steady surface.
Frequently check the equipment, especially before
storage (for example, before the winter period),
regarding wear and damages.
For safety reasons, replace worn or damaged parts
immediately so the appliance is always in perfect
operating conditions.
concentrate,
stop
working
Cleaning:
The power tool must be thoroughly cleaned after each
use.
Do not use aggressive cleaning products. These
products
may
damage
compromising the safe operation of the power tool.
Maintenance:
Only maintenance works described in this instruction
manual may be carried out; all other works must be
performed by an official distributor.
Only use attachments, oil or grease authorized by VITO.
Not doing so may result in personal injuries or damages
to the cordless brush cutter. If in doubt, you should
contact an official distributor.
Keep warning and information stickers always clean and
legible.
Keep all nuts and bolts well tightened in order to ensure
a safe operation.
If any components or safety devices are removed for
maintenance works, they must be repositioned
immediately and correctly.
Long-term storage
Clean the equipment thoroughly before storage,
especially in winter. Store the brush cutter in an
operating condition.
Make sure the appliance is protected against misuse
(for example, by children).
Technical assistance
Your cordless split-shaft brush cutter should only be
serviced by the manufacturer's internal service
personnel, or other qualified personnel, replacing any
necessary parts with original parts.
plastics
and
metals,
31
Publicidad
