Vito Agro VIBCRSBSFL40 Manual De Instrucciones página 36

MAINTENANCE SCHEDULE
Action
Inspect the tightness of the bolts
and nuts
Check the conditions of cutting
attachments and guard
Perform frequent maintenance works when the equipment is used in dusty areas.
These items should be serviced by the service dealer unless you have the appropriate tools and mechanical
knowledge.
FREQUENTLY ASKED QUETIONS/ TROUBLESHOOTING
Question/Problem - Cause
Cause
Low performance:
• The battery is discharged;
• Trigger contacts are not in good condition or it
does not work;
The motor makes an abnormal sound, starts
intermittently or runs slowly:
• The trigger contacts are damaged;
• Mechanical parts are blocked;
• The brush cutter is running over excessive
pressure, overloaded motor;
Brush cutter overheats:
• Overloaded appliance;
• Poor assembly of the housing or pieces inside the
brush cutter;
36
1st month Every 3 months
or 20 hours
 
 
Solution
• Charge it;
• Repair or replace the trigger;
• Repair or replace the trigger;
• Inspect the mechanical parts;
• Reduce the pressure applied;
• Reduce the pressure applied;
• Check if there is any blockage;
Every 6 months
or 50 hours or 100 hours


Every year or
300 hours
 
 