Elcometer Bresle 138 Guia Del Usuario página 3

R
CONTENTS
Section
1 Overview
2 Box Contents
3 Test Procedure: ISO 8502-6 / ISO 8502-9
4 Test Procedure: US Navy PPI 63101-000
5 Technical Specification
6 Spares & Accessories
7 Legal Notices & Regulatory Information
APPENDIX A: Using the Elcometer 138 Bresle Salt Meter or Elcometer 138 Conductivity Meter
A1 Caution
A2 Fitting and Replacing the Batteries
A3 The Controls and Display
A4 Electrode Surface Treatment Procedure
A5 Calibration Procedure
A6 Taking a Reading
A7 After Measurement
A8 Care and Maintenance
For the avoidance of doubt, please refer to the original English language version.
A Material Safety Data Sheet for the Elcometer 138 Standard 84μS/cm Calibration Solution is available to download via our website:
https://downloads.elcometer.com/MSDS/Elcometer_138_84uScm_Calibration_Solution.pdf
© Elcometer Limited 2009-2022. All rights reserved. No part of this document may be reproduced, transmitted, transcribed, stored (in a retrieval system
or otherwise) or translated into any language, in any form or by any means (electronic, mechanical, magnetic, optical, manual or otherwise) without
the prior written permission of Elcometer Limited.
en-1
Page
en-2
en-3
en-4
en-7
en-10
en-13
en-14
en-16
en-1 6
en-17
en-19
en-19
en-20
en-21
en-21
www.elcometer.com