Sauder Costa Serie Manual Del Usuario página 52

Hardware Usage Guide
HOW TO USE A HIDDEN CAM & CAM DOWEL
Cam Dowel
Arrow
Metal end
Hidden Cam
3.
Caution
Risk of damage or
injury. HIDDEN CAMS
must be completely
tightened. HIDDEN
CAMS that are not
completely tightened
may loosen, and parts
may separate. To
completely tighten:
Step 42
å
Push seven HIDDEN CAMS (1F) into
the PANELS (G and O). Then, insert the
metal end of a CAM DOWEL (2F) into
each HIDDEN CAM.
Do not tighten the HIDDEN CAMS in this step.
Page 52
Start
Arrow
1F
Arrow
Metal end
2F
1.
Push a HIDDEN CAM into
the part. The arrow in the
HIDDEN CAM must point
toward the hole in the edge
of the board.
Arrow
2F
Metal end
430237
2.
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Hole
Tighten
Maximum
210 degrees
Minimum
190 degrees
1F
G
O
www.sauder.com/service
Arrow
1