Sauder Costa Serie Manual Del Usuario página 6

Step 1
å
Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your
unit or the floor.
å
Turn two BLACK 9/16" FLAT HEAD SCREWS (32S) into the LEFT END (B) until the
shoulders of the SCREWS rest on the surface of the LEFT END.
å
NOTE: Do not overtighten the SCREWS.
å
Slide one of the END MOLDINGS (F) onto the LEFT END (B). Line up the groove in the
MOLDING over the heads of the SCREWS in the LEFT END.
å
NOTE: The MOLDING should be even on both edges of the LEFT END.
å
NOTE: If the MOLDING comes up off of the SCREWS, remove it and slide it on again.
Page 6
Look for this icon. It means a video assembly tip is
available at www.sauder.com/service/tips
Find the numbered video or scan the QR code.
BLACK 9/16" FLAT HEAD SCREW
B
430237
32S
(2 used in this step)
Shoulder
Apply pressure with your hands
as you guide the MOLDING over
the SCREWS and onto the END.
www.sauder.com/service
0
F