Qilive Q.5404 Manual De Instrucciones página 9

Espresso/Long Espresso/Hot Water/Cleaning function :
EN
Please press the icon to make an espresso, the icon to make a long espresso, the icon
to make hot water and the icon to clean the internal coffee system.
If you press the Espresso icon or Long Espresso for 2 to 4 seconds, the machine will
prepare two cups of espresso or two long espressos continuously.
During the Espresso/Long Espresso/Hot Water/Cleaning process, the user can also press the icon
of the selected function again to stop the process at any time.
Caution: After the coffee has been brewed, the percolator automatically returns to its initial
position. You must wait until this process is complete before you can use the coffee machine again.
Steam function for the milk frother :
1.Press the steam icon , it will flash and the indicator lights (C) will light up in turn. This means
that the heating unit of the steam nozzle is heating up.
2.When the indicator goes out and the steam icon remains lit, this means that the steam is
ready to be used.
3.Place the steam nozzle in the milk and press the steam icon to froth the milk, then press the
icon again to stop the process.
Caution: After using the steam function, do not touch the steam nozzle directly to avoid burns. It
is important to make a short blast of steam again, in order to expel the milk remaining inside the
steam nozzle, and then use a cleaning cloth to remove the milk on the surface of the steam.
4.When the steam function is finished, press the hot water icon and the machine will
automatically cool down to the coffee brewing temperature. The hot water and steam icons will
flash alternately during this process, and the indicator lights (C) will light up in turn.
5.Do not use the machine: Wait until the lights stop flashing and the 4 function icons (B) on the left
are still lit. The machine is now ready to make coffee or hot water again.
CUP HEATER
For a better tasting experience, we recommend that you first place your cups on the cup warming
tray (n°3 on the general diagram).
This is even more important when the quantity of coffee is small (espresso or ristretto).
SETTING FUNCTIONS
Setting the amount of coffee :
1.Press the Espresso icon or Long Espresso for 5 seconds, the function icons light up,
then the machine automatically makes coffee.
2.When the amount of coffee reaches the level desired by the user, press the icon of the selected
function (B) again and the machine will stop producing coffee.
3.The amount of coffee produced will be stored by the machine, and the coffee machine will
produce the same amount of coffee in the next cup.
Remarks : The amount of espresso is between 30 and 80 ml, and the amount of long espresso
between 60 and 250 ml.
If the user does not press the icon of the selected function (B) again to stop coffee production, the
process of setting the quantity of coffee will not be validated.
Setting the automatic shutdown:
When the machine is turned on, press the power icon Press the power icon to navigate
through the indicator lights (C) and select the time for the machine to automatically switch off after :
0.5 h / 1 h / 2 h / 4 h of power on, or select OFF to keep the machine on continuously. To confirm
the setting, you must wait 3 seconds, and the power icon will flash and turn off. As a reminder, the
machine will perform a self-cleaning process at each automatic or manual shutdown.
9