Dimplex XLF60 Manual Del Propietário página 20

Operation (continued)
Disable Heat
If desired, depending on the
season, the heater on the unit can
be disabled. The function of the
remaining controls will continue
to function as outlined in this
manual.
Pressing the and
on the unit at the same time and
holding for 2 seconds will disable
and enable the heater.
! NOTE: When the heater has
been disabled and any of the
heat related functions are used,
the Display will indicate "---".
If the Permanent Heat Disable
has been activated by removing
the jumper on the main PCB, the
display will indicate "H--".
H. Color Themes
Different presets of lighting color
combinations are available in
the unit.
Changed by repeatedly
pressing the corresponding
button on the remote or the
unit.
20
All manuals and user guides at all-guides.com
• Cycles through the different
buttons
I.
Changes the Brightness of the
lights in the unit.
• Indicated by the second digit
Pressing the T- and Brightness
buttons at the same time and
holding them for 2 seconds will lock
(
LOC
(
U L
controls on the fireplace.
preset light settings of the
unit, this includes different
combinations of colors of the
flame base and media lighting.
! NOTE: Two of the themes in
the cycle are a prism where the
unit cycles through a variety of
colors. Pressing the
the cycling and holds the unit on
the preferred color, indicated by
a solid circle. When the unit is
on prism, and is cycling through
the colors, a rotating circle will
be displayed.
Brightness
Adjusted by repeatedly pressing
the corresponding button on the
remote or the unit.
on the Display changing to
show: "H" (high), and "L" (low).
will be displayed) or unlock
will be displayed) the manual
stops
www.dimplex.com