Publicidad
Idiomas disponibles
Idiomas disponibles
ensure that the rated load of the power outlet is not less than that
required by the device.
The power cord must be replaced if damaged. All replacement
parts must match the original type and specification. Do not hang
anything on the power cord when this device is in use. Place the
power cord away from foot traffic.
Be sure to hold the plug when plugging or unplugging the power
cord. Ensure that the plug is fully inserted into the socket when
plugging in, and do not pull the power cord when unplugging. If the
supplied power adapter does not fit your local outlet, replace or add
a suitable power adapter to ensure that the power supply matches
the conditions required by the device.
The device should be stored in an environment with low
humidity and dust. Store away from direct sunlight and strong light
sources. The room should be well ventilated and free from
corrosive gas or strong magnetic field interference. Keep away
from heating, stoves and all other heat sources. Do not place the
device in damp or dusty places. Do not place the device where will
be difficult to access and disconnect the device in an emergency.
Turn off the power supply to the device when it is not in use.
When the device will not be used for an extended period, the cable
should be unplugged and the device covered with a soft cloth or
suitable plastic cover, to prevent dust from entering it.
Under the following circumstances, immediately remove the
power plug of the device from the power socket and contact the
supplier or trained maintenance personnel to deal with the situation:
Liquid spilled on the device
Device is exposed to rain or water
Device is dropped or casing is damaged
The functions of the device have changed significantly
- 03 -
Publicidad
