Nuna Ivvi Manual De Instrucciones página 5

Parts list
Make sure all parts are available before assembly. If any part is missing,
please contact local retailer. No tools are required for assembly.
1 Rain Cover (Carry 4 Carry cot cover
Cot Mode) 5 Handle
2 Carry Cot 6 Carry cot release
3 Canopy
1
Contents of the Box
Carry cot
Rain cover
10
7 Matress pad
8 Accessory bag
(maximum load =
button 2.86 lbs)
4
2
8
7
Carry cot
Carry Cot assemble
1 Open the wire support on both side of the carry cot.
the wire into the four plastic parts. A "Click" sound means the wire
support is secure.
smooth it down.
! Always use the mattress when using the carry cot.
3
! Mattress cover can easily be removed to wash.
2 Attach the pocket to the carry cot with zipper.
5
3 Attach the boot to the carry cot with the zippers on either side.
6
Adjust Carry Cot Canopy
1 Pull canopy towards front end to secure.
! Be sure the handle is locked at 90° in the forward most position before
lifting carry cot by the handle.
2 Close the canopy by pressing the folding buttons on both side.
Attach Carry Cot onto Chassis
1 Align the sides of the carry cot with the adapters on the frame.
2 Place the carry cot directly down until it clicks into place.
3 A click sound means carry cot assembled completely.
! Always remove the car seat adapters before using the carry cot.
! Do not fold stroller when carry cot is attached.
(1)
(1)-1
Place the mattress into the carry cot,
(3)
(4)
(6)
Then click
(2)
and
(5)
(6)-1
(7)
11