Energeeks EG-AL002 Manual De Usuario página 21

EG-AL002
Installation
Please note the following situations; in case it can't be used once finished the
installation.
Don't install it in
place where it is
easy broken.
Installation introduction
Once you have planned where you will put your standalone sensors. You need to
clean the surface you will be sticking the contact. Use your preferred cleaning
solution & allow the surface to dry.
Please be noted when installing the sensor unit A and sensor magnetic B sepa-
rately, such as A is on the door then B is on the door frame.
21
Don't install it in
place where the
base isn't stable.
Siren
Don't install it in
place where it is near
the magnetic goods.