Energeeks EG-AL002 Manual De Usuario página 22

User Manual
Maintenance
Replace the battery
The user should replace the battery, once the sensor working under low battery.
Otherwise the sensor will not work. Please follow the below steps for replace
battery:
1. Press the contact (A); slide down to open the battery cover
2. Remove the old battery
3. Put the new battery in it; the battery is AAA 1.5V *2. Please note the positive
& negative pole
4. Test the sensor; used a magnetic to trigger the sensor. It will be arming im-
mediately
5. Fasten the sensor in the same place.
Interval < 10mm
22