Publicidad
Idiomas disponibles
Idiomas disponibles
C
• Remove the evaporator tray by removing the screws as shown. Clean it with soapy water at
regular intervals. This will prevent any formation of odours.
LED lighting replacement
To replace the LEDs, contact the authorised after-sales service.
NOTE
The number and location of LED strips may vary
depending on the model.
Some versions do not include freezer lighting.
Transport and removal
Transport and removal
• The original packaging and foam can be kept for transporting the appliance again (optionally).
• Wrap the appliance in heavy packaging, with strong straps or ropes and follow the transport
instructions on the packaging.
• Remove all removable parts (freezer drawers, ice cube trays, etc.) or fix them in the appliance
using adhesive tape to avoid any impacts if you move or transport it.
WARNING
Always transport the appliance in an upright position.
Door reversal
• The door opening direction of the appliance can only be changed if the handles are mounted on
the front surface of its door.
• It is possible to change the door opening direction on models without handles.
Find the explanatory diagrams at the end of this manual from page 100 to page 104.
Practical information
18
EN
Publicidad
