Do not excess 90°
Figure 15
Figure 17
5. Close the top cover of the beer cooler; When pouring out the beer, the
turn the knob on the top cover to "+" position to release the CO2, and
turn it to "-"position when pause or stop pouring beer to close the CO2.
Please refer to the notice label on the top cover.
6. Turn on the power switch to "I" position to power on the beer cooler.
(While "0"position is to power off it).
NOTES: Please make sure your hands are dry when you operate the beer
cooler, to avoid electric shock.
Regulator
assembly
Cover assembly
CO2 bottle sheath
Figure 18
16g CO2
Figure16