Descargar Imprimir esta página

Hkoenig bw1880 Manual De Instrucciones página 19

Ocultar thumbs Ver también para bw1880:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Preset Temperature
The beer cooler has 6 preset temperatures.
Press and hold "-" button, it enter the 6 preset temperatures, then
you can press "-" button to choose a certain preset temperature,
40℉ (4°C), 46℉ (8℃ ), 48℉ (9℃ ), 50℉ (10℃ ), 52℉ (11℃ )
and 54℉ (12℃ ).
Press and hold "+" button, the unit can achieve conversion between
Fahrenheit and Celsius.
Figure 20
a. Adjust the CO2 pressure regulator knob to "+" position, to pour the
beer out by pulling down the tap mechanism about 45°, and you can
adjust the pressure regulator knob to control the beer flow rate and beer
bubble; (Figure 13)
Note: Clean the glass before pouring beer out; if the beer or beer cup/glass
is in high temperature or the beer is not cool enough, there are many
bubbles when pouring beer out;
b. When taping the beer, lean your beer glass against the pouring spout
and slowly straighten it up with the beer rising, then open the tap
mechanism completely to avoid much bubble; It is advisable to pour half-
glass, make a short pause before continuing the rest. NOTES: Never
immerse the pouring spout into the beer glass to avoid much bubble;
Remember to lock the tap after finishing pouring.

Publicidad

loading