Hkoenig bw1880 Manual De Instrucciones página 22

3. Close the top cover; operate it as above step 6-12, as the universal 5
liter keg, but step 9 is exception.
TO CHAGE A NEW BEER KEG (5 liter universal keg)
10.
When the beer in the keg runs out, before changing a new beer keg.
a. Adjust the CO2 pressure regulation knob to "-" switch to shut off the
CO2 supplying and save the CO2.
b. Open the top cover of the beer cooler, pull down the tap handle to
release the rest gas in the keg (maybe with some beer bubble).
c. Then put the piercing pin into the new keg and put into the beer
cooler. Connect the gas-tube and beer tube from the keg lifter, by
pressing the white parts of keg lifter.
d. Disconnect the gas-tube and beer tube from the keg lifter,
e. Take out the keg by the keg lifter, and pull out the piercing pin from