the keg.
f.
It is recommended to clean the tap mechanism when changing t
he
beer keg each time. Please refer to the below contents about cleaning.
TO CHAGE A NEW CO2 CARTRIDGE (No need for Heineken keg)
11.
Please change the CO2 cartridge if can't pour beer out when the CO2
pressure knob is at "on" position and has beer in keg
1. When turn the CO2 pressure knob to "-" position, to close the CO2
supplying.
2. Open the top cover, loose the cartridge sheath, and take out the empty
CO2 cartridge.
Insert a new 16g CO2 cartridge in the sheath, and screw the sheath tightly
until you will hear a "Click", which indicates that the cartridge seal has
been pierced and the CO2 gas can flow into the keg freely. Make us the
bottle sheath is fixed tightly to avoid the CO2 leakage. Then put CO2
bottle sheath into the top cover.
3. Close the top cover of beer cooler;