Publicidad
Idiomas disponibles
Idiomas disponibles
In presence of particularly high magnetic fields assess the possible effects on the control
electronics.
Never wash the machine with jets of water.
The recycled fluids contain detergents, disinfectants, water, organic and inorganic stuff
recycled during the work stages: they must be disposed of in compliance with the laws in
force.
In case of breakdown and/or bad operation of the machine, switch it off immediately
(unplugging it from the mains) and do not tamper with it. Contact a technical assistance
centre of the Manufacturer's.
All maintenance operations must be performed in adequately lighted environments and
only after having disconnected the machine from the power supply (in models with cable
by unplugging the machine from the socket, while in models with battery by detaching the
battery connector).
Have any electrical work and all maintenance and repair operations (particularly those not
explicitely described in this manual) carried out a specialised and trained technical staff
only.
In case of replacement of the power supply cable, plug or terminals, perform the repair by
properly fixing the electric connections and the cable blocking strap that is located in the
control panel, to guarantee the resistance of the cable. Then reassemble the panel with
care to ensure the protection of the machine user.
Only the use of original accessories and spare parts supplied by the Manufacturer is
permitted, as only these offer the certainty that the machine will operate safely and
without any inconveniences. Do not use parts removed from other machines or other kits
as spares.
This machine has been designed and manufactured for a service endurance of ten years
starting from the date of manufacture, which can be seen on the identification plate (see
fig. 1). After this time, whether the machine has been used or not, disposal must be
considered according to the laws in force in the place of use:
- the machine must be disconnected from the mains, emptied of all liquids and cleaned;
- then it must be dismantled in homogeneous groups of materials (plastics according to
the indications of the recycling symbol, metals, rubber, wrapping and packing). In case
there are parts composed of different materials, refer to the competent bodies;
- each homogeneous group must be disposed of according to the laws governing the
recycling of materials.
Alternatively, the machine can be sent to the Manufacturer for a thorough overhaul.
If the machine is not used anymore, it is recommended that batteries are removed and
deposited at an authorized collecting centre.
Moreover, it is recommended that you make harmless those parts of the machine that
could be dangerous especially to children, who could use the machine for their games.
5.1
Lifting and carrying the packed machine
In all lifting operations make sure that the packed machine has been tightly
anchored to the pallet, in order to avoid any overturning or accidental falls.
Loading and/or unloading from the motor vehicles must be performed in an
The machine, which is packed on a wooden pallet by the Manufacturer, must be loaded
by means of proper handling machines (refer to the EEC provision 89/392/CEE and
following amendments), onto the carrier and, once it has arrived at the appointed
destination, unloaded by similar means.
The squeegees are packed in cardboard boxes without a pallet.
ENGLISH
8
5.
HANDLING AND INSTALLATION
WARNING
adequately lighted environment.
Publicidad
