Descargar Imprimir esta página

IP Cleaning IPC CLEANTIME 40 Manual De Instrucciones página 32

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

After
recharging
electronic battery-charger the
storage-battery does not show
the
correct
voltage
2,14V for each empty element)
and only one or few elements
turn out to be flat when tested
with densimeter (models with
battery only)
After
recharging
electronic battery-charger the
storage-battery does not show
the
correct
voltage
2,14V for each empty element)
and only one or few elements
turn out to be flat when tested
with densimeter (models with
battery only)
The electrolyte that is present
in the storage battery has a
cloudy colour) (models with
battery only)
ENGLISH
24
• the storage battery has not
with
an
been connected to the battery-
charger (for instance because
the low voltage connector of the
(about
battery-charger
erroneously connected to the
machine connector)
• the battery-charger and the
power
storage battery is connected are
not compatible
• the battery-charger has not
been installed correctly
• the battery-charger does not
work
• one or more elements are
with
an
damaged
(about
the
completed the charge/discharge
cycles
Manufacturer
• the storage battery has been
recharged with a too high current
• the storage battery has been
charged
suggested by the Manufacturer
has
been
socket to which the
storage
battery
has
indicated
by
the
beyond
the
limit
• connect the battery-charger
to
the
storage
connector
• check that the power supply
characteristics indicated on
the battery-charger plate are
compliant with those of the
mains
• taking into account the actual
voltage
available
at
socket,
check
that
connections
of
transformer primary circuit in
the
battery-charger
correct (at this purpose read
the manual to the battery-
charger)
• check that there is voltage at
the battery-charger, that the
fuses are not interrupted and
that there is current at the
storage battery; in addition
try to charge by means of
another
rectifier:
if
battery-charger
does
work,
call
the
after-sales
service staff communicating
the serial number of the
battery-charger
• replace, if possible, the
damaged
elements.
monoblock storage batteries
at 6V or 12V, replace the
whole storage battery
• replace the storage battery
• replace the storage battery
• replace the storage battery
battery
the
the
the
are
the
not
For

Publicidad

loading

Productos relacionados para IP Cleaning IPC CLEANTIME 40