Descargar Imprimir esta página

BOMANN CL 6045 QC CB Manual De Instrucciones página 89

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 53
• If the appliance is giving off smoke or a burning odour is detected, immediately disconnect the power supply and
consult your service technician. Use of the appliance under such circumstances and/or in this condition can cause
fire or electrical shock.
• Use the button to switch off the appliance if you are not using it for an extended period of time.
• Make sure the air flow direction is correctly installed. The valves must point downwards during heating mode and
upwards during cooling mode.
• By avoiding extreme fluctuations in temperature settings, damage to the appliance can be avoided.
• Do not bend, pull or crush the power cable as it can become damaged thereby. A damaged power cable can
cause electric shocks as well as fires. Only specialized technical staff must be permitted to replace a damaged
power cable.
• Do not block the air inlet or outlet of the interior appliance or of the exterior appliance. Blocking or plugging these
openings will lead to reduced cooling capacity and can cause malfunctions or damage. Do not perform any unau-
thorized or improper changes or alternations on the appliance.
• Do not place any heavy or hot objects on the appliance.
• Do not leave windows or doors open for long periods of time when the air conditioning unit is in use.
• Do not point the air current at plants or animals. Long periods of direct exposure to cold currents of air can have a
negative impact on plants and animals.
• Do not climb on the external appliance and do not place any objects on top of it.
• Never insert a rod, bar or pole or similar object into the appliance. This can cause personal injury as well as mate-
rial damage.
• Be sure to use an appropriate, specifically-designed tool for the laying and bending of the cooling pipes. For safety
reasons, any buckling of the delicate cables must be avoided at all costs. All work must be performed by a certified
company and correspondingly documented and determined in accordance with the equipment attached to the
appliance.
• The cooling pipes must not be extended or shortened without undertaking further measures, since these have
already been pre-filled with a cooling agent at the factory during manufacture.
CAUTION:
All technical modifications to the cooling pipes must carried out by a certified specialist company. Improper alter-
ations or modifications shall result in expiry of the warranty.
• Check to ensure that all pipes and cables are impermeable to prevent the formation of liquids, water vapour or
condensate and e.g. to prevent their penetration of the interior walling of the appliance. This will prevent the accu-
mulation of moisture as well as the formation of mildew.
Handling Batteries
WARNING:
• Do not expose batteries to excessive heat such as sunlight, fire or
similar. There is a risk of explosion!
• Batteries are not toys. Keep away from children.
• Do not open batteries by force.
• Avoid contact with metal objects (rings, nails, screws, etc.). There is
a risk of short circuit!
• A short circuit could cause the battery to heat up excessively or
even to catch fire, resulting in injuries.
• For your own safety, cover the battery terminals with adhesive tape
during transport.
• In case of battery leakage, make sure not to rub the liquid into your
eyes or mucous membranes. In case of contact, wash your hands
and rinse your eyes with clear water. Seek medical attention if any
discomfort persists.
• Non-rechargeable batteries are not to be recharged.
• Ensure correct polarity when inserting the battery / batteries.
CL6045QCCB_IM
CAUTION:
• When not using the remote control for a long period of time, remove
the batteries in order to prevent "leakage" of battery acid.
• Different battery types or new and used batteries must not be used
together.
• Do not dispose of batteries along with domestic waste. Return used
batteries to the relevant collection facilities or your retailer.
Unpacking the Appliance
1. Remove the appliance from its packaging.
2. Remove all packaging materials such as foils, filling materials and
cardboard packaging.
3. Check the appliance for possible transport damage to prevent haz-
ards.
4. If damage occurs, do not operate the appliance. Contact your distrib-
utor.
89
17.12.20

Publicidad

loading

Este manual también es adecuado para:

Cl 6046 qc cbCl 6047 qc cb