BLUEFIN Fitness KICK 2.0 Manual De Instrucciones página 17

OPERATION INSTRUCTIONS
(cont.)
Manual Program Mode
You may pre-set target TIME, DISTANCE, or CALORIES in STOP mode before training.
Only one of the functions can be pre-set.
To set TIME press the MODE button on the computer console until you see the split
window of TIME begin blinking. Press the SPEED + or SPEED - button on the computer
console or handlebar to change the setting. Each increment is 1 minute. The pre-set
target time range is from 5:00 to 99:00 minutes. Once you pre-set target time, press
the START button on the computer to begin exercising.
To set DISTANCE press the MODE button on the remote until you see the split window
of DISTANCE begin blinking. Press the SPEED + or SPEED - button on the remote to
change the setting. The pre-set target distance range is from 0.50 to 65.0 kilometers,
the default distance is 1 kilometer. Once you pre-set target distance, press the START
button on the computer to begin exercising.
To set CALORIES press the MODE button on the computer console until you see the
split window of CALORIES begin blinking. Press the SPEED + or SPEED - button on the
computer console to change the setting. The pre-set target calorie range is from 10 to
995 calories. Once you pre-set target calories, press the START button on the computer
to begin exercising. The running belt starts moving with an initial speed of 1.0 KPH.
Pre-Set Program Training Mode:
The computer offers 16 pre-set programs (P01-P16). You may select one of the pre-set
training programs in STOP mode before training. Press the PROG (PROGRAM) button
on the remote to select one of the training programs, press the START button on the
computer to begin exercising.