BLUEFIN Fitness KICK 2.0 Manual De Instrucciones página 19

TROUBLESHOOTING
PROBLEM
Treadmill will not
start.
Belt slips.
Belt hesitates
when stepped on.
Belt is not
centered.
POTENTIAL CAUSES
Treadmill not plugged in.
Safety Tether Key is not correctly
installed.
Circuit breaker (home) has been
tripped.
Treadmill circuit breaker has been
tripped.
Belt not tight enough.
Not enough lubrication applied onto
the running belt.
Belt is too tight.
Running belt tension not even
across the rear roller.
CORRECTIONS
Plug the power cord into
a wall outlet.
Reinstall the Safety
Tether Key.
Reset the circuit breaker,
or call an electrician
to replace the circuit
breaker.
Wait 5 minutes and
then try to restart the
treadmill.
Adjust belt tension.
Apply lubricant.
Adjust belt tension.
Centre the belt.