Publicidad
Idiomas disponibles
Idiomas disponibles
■ Operation instruction
1. To switch on/off heat pump
From home page, press
When heat pump is running, temperature area displays actual tank water temperature, time area
displays actual time, mode area displays operation mode.
When heat pump is standby, temperature area displays actual tank water temperature, time area
displays "stby".
2. To set desired water temperature
When heat pump is running, press
Then press
Waiting for 10s or press
3. To set operation mode
When heat pump is running, from home page press
There are two modes which are AUTOMATIC, HEAT PUMP.
Heat pump mode: only heating water by the heat pump, temperature range 28℃-65℃.
Auto mode: heating water under heat pump mode before 60℃, after that heating water by
electric heater, temperature range 28℃-75℃.
4. To set timer on/off
There are 3 timer buttons
heat pump.
It only needs to set timer on, there is no timer off, and heat pump will switch off when it reaches
the temperature setting.
When heat pump is under standby status, press either timer button
timer setting page.
Temperature area will display "OP", the time area will display the start time.
Press
or
After complete the time setting, press the timer button again to confirm and return to home page.
When heat pump is under standby status, press either timer button
timer, press again to switch off the timer.
Note: default time for timer1 is 05:00, timer2 is 10:00, and timer3 is 17:00.
button to switch on/off heat pump.
or
to change setting.
for 3s to save setting and return to home page.
button to change the time setting on, time vary every 30mins.
or
to enter water temperature setting page.
button to set working mode.
on the control panel which is used for set timer on for
18
for 3s to enter
to switch on the
Publicidad
