Hama Passion Chop Instrucciones De Uso página 9

1 Check the status of the status LED (3)
If the status LED (3) of an earphone is flashing alternately and the
announcement is:
green / red
the earphones are searching for a Bluetooth
If the status LEDs (3) are flashing and the announcement is:
green
the earphones are already paired with a Bluetooth
2 Search using your device for the earphones (only required on the first connection)
Open the Bluetooth settings on your device and wait until the list of
®
found Bluetooth devices shows Hama Passion Chop� The announcement "Pairing" is heard�
®
Select Hama Passion Chop and wait until the earphones are shown
in your device's Bluetooth
Note - Bluetooth password
®
Some devices require a password in order to connect to another Bluetooth
• If your device requests a password to connect to the earphones, enter 0000�
Disconnecting the Bluetooth
3
Disconnect the earphones via your device's Bluetooth
"Disconnected" is heard�
settings� The announcement "Connected" is heard�
®
Bluetooth
ON
Hama Passion Chop
connection
®
connection�
®
device�
®
Password
0000
device�
®
settings� The announcement
®
9