LUND 68172 Manual De Instrucciones página 13

Removal of mineral deposits
Depending on quality of water, minerals precipitated from water in the heating process may be deposited inside the kettle. This
is a normal phenomenon and does not interfere with the operation of the kettle. In the case of accumulation of deposits, they
should be removed using acetic or citric acid. Pour 0.5 l of vinegar into the kettle or add 40 g of citric acid, fi ll the kettle with water
up to maximum level. Boil the contents of kettle, and then leave the kettle for about 30 minutes. After this time, empty the kettle,
rinse with clean water and wipe the interior dry. If mineral deposits have not been completely removed, repeat the entire removal
process.
Storage and transport of the product
The product when stored should be kept in closed rooms, protect it from dust, dirt and moisture. It is recommended to store the
product in its original packaging.
Store the product in its working position. Do not store products in layers. Do not put anything on the product during its storage.
Transport the product in the factory packaging. Protect it against excessive shocks during transport. Do not put anything on the
product during its transport.
TECHNICAL DETAILS
Parameter
Catalogue number
Rated voltage
Rated frequency
Rated power
Insulation class
Capacity
Temperature control
Temperature sensor inaccuracy
Net weight
O R I G I N A L
GB
Measuring unit
[V~] 220 - 240
[Hz]
[W] 1850 - 2200
[l]
[ O C]
[ O C]
[kg]
I N S T R U C T I O N S
Value
68172 68173
220 - 240
50 / 60 50 / 60
1850 - 2200
I I
1.8 1.7
- 40 ~ 100
- ≤5
1.1 1.2
68174
220 - 240
50 / 60
1850 - 2200
I
1.8
40 ~ 100
≤5
1.5
13