Descargar Imprimir esta página

GE Profile PLU612 Manual Del Propietario E Instrucciones De Instalación página 9

Publicidad

Idiomas disponibles

Idiomas disponibles

Rangetop Surfaces
Porcelain Enamel Rangetop
liquid cleansers, steel wool, plastic scouring pads, or
cleaning powders on the rangetop surface. Clean with a
water. Rinse with clean water and dry with a soft cloth.
WARNING
Doing so may result in fire or explosion hazard.
panel before removing rangetop.
2. Lift up and remove grate from rangetop.
4 Screws
Burner Caps
Wipe burner caps with hot, soapy water and rinse with
Burner Heads
Wipe the burner heads routinely, especially after bad
spillovers which could clog the burner openings. Wipe
with hot, soapy water. Rinse with clean water. For more
stubborn stains, use a brush with plastic bristles.
NOTE:
the burner parts as these may clog the openings. The
ports in the burner heads must be kept clean at all times
for an even, unhampered flame. Clogged or dirty burner
ports or electrodes will not allow the burner to operate
properly.
49-2001154 Rev. 0
Remove Grate
When cleaning surfaces, make sure that they are at
room temperature. Spillage of marinades, fruit juices,
tomato sauces and basting liquids containing acids may
cause discoloration and should be wiped up as soon as
not spill water into rangetop openings.
screwdriver, then lift up on the cooktop to remove.
4. Clean with a mild soap and water solution with a
damp cloth. Rinse with clean water and dry with soft
cloth.
Burner Grates
Grates should be washed in hot, soapy water and rinsed
for several hours. Afterward, scrub grates with a plastic
scouring pad soaked in hot, soapy water. Rinse well
rangetop or burner grates.

Publicidad

loading

Este manual también es adecuado para:

Profile plu621