Publicidad
Idiomas disponibles
Idiomas disponibles
1
- INTRODUCTION
1.1 Consulting the Use & Maintenance Manual
Before working on the equipment, carefully read and understand this Use & Maintenance Manual in order to safeguard the
operator and to avoid damaging the equipment.
These instructions describe how to operate the equipment safely, economically and in compliance with the current safety regula-
tions. Following these instructions helps avoid dangerous situations, reduce repair costs and down-time and extend the service life
of the equipment.
This manual is to be kept legible and in good condition. The operating and maintenance staff should have this manual at hand, so
that they can consult it whenever needed.
1.2 Symbols and qualifications of the operators
All operations described in this manual should be performed by qualified personnel and as outlined in the manufacturer's manual.
Each procedure described herein is accompanied by an icon which indicates the qualifications required by the operators. The
instructions required to identify the personnel qualifications are given below.
Operators
Personnel capable of installing, working with, regulating, maintaining, cleaning, repairing or transporting the equipment.
Mechanics
Qualified personnel capable of installing, servicing and repairing the equipment as directed in this manual.
AUTHORIZED SERVICE POINTS
These are the centres, indicated by our sales staff, authorized to repair the products manufactured by CAMPAGNOLA S.r.l.
WARNING!
Precautions to be taken in order to safeguard the operators and bystanders in the work area.
IMPORTANT!
Precautions to be taken in order to avoid problems with the equipment and to operate it in compliance with the current
safety regulations.
1.3 Compliance certificate
All equipment to be marketed in the European Union (EU) fully complies with the European Council Directive 98/37/EC.
The compliance certificate is supplied by the manufacturer with the Use & Maintenance Manual.
1.4 Receiving the product
When receiving the product, make sure:
•
the product has not been damaged during transport;
•
the product supplied is the same as that ordered. Check that all accessories have been delivered (refer to "Product Descrip-
tion", "Specifications" chapter).
If problems arise, contact the CAMPAGNOLA S.r.l. Service Department quoting all details stamped on the nameplate (refer to
"Product Description", "Specifications" chapter).
1.5 Warranty
•
The tools and machines manufactured by CAMPAGNOLA S.r.l. are guaranteed for 1 or 2 years, depending on the kind of
product, starting from their purchase date indicated in the invoice or in any other document with legal value.
•
The warranty is to be considered valid only if the installation and use of the compressor and/or tools have been carried out
according to the instructions indicated in the Use and Maintenance Manual or to instructions written by the Authorized Service
Point personnel.
•
Originally faulty parts will be repaired or replaced free of charge.
•
The purchaser shall pay for the labour and transport costs.
•
All the parts subject to wear are not subject to the warranty.
•
The eventual costs of intervention performed by the CAMPAGNOLA S.r.l. personnel (inspections, disassembling and assem-
bling operations), caused by wrong working which was not due to manufacture faults, are not included in the warranty.
•
Replacements or repairs of faulty equipment, when warranty is claimed by the users, can only be authorized by accredited
Service Points personnel and their decision is final.
•
The tool is guaranteed to be free from defective materials and workmanship. This guarantee does not cover any personal
injury or property damage caused by misuse, careless or unsafe handling, inadequate maintenance or repairs of the shaker.
15 - 80
Publicidad
