Sagola HT 10 Manual De Instrucciones página 36

Remove any remains of product from the gun, hoses and the rest of the unit with a cloth soaked
in thinner.
Keep gasket areas free of accretions and foreign bodies.
The air cap is a precision component. Any deformation, especially in the product outlet orifices,
may cause malfunctions in its operation and incorrect or deficient quality spraying.
If necessary, dip the air cap in thinner in order to soften the remains of product or dirt. Once
softened, blow the cap with compressed air until any remains of product and thinner are
eliminated.
For automatic cleaning of the gun, tools and accessories used in the mixing and preparation of
the product to be applied, we recommend the use of SAGOLA Washing Machines.
The gun can be cleaned with thinners or detergents in a gun washing
machine.
If you opt for this cleaning system, we advise you to remember the following considerations,
which, if not applied, may damage the gun and render the warranty null and void:
Do not submerge the gun in solvent or detergents longer than the
time required for cleaning.
Do not use the gun immediately after cleaning has been completed.
Ensure that there is no thinner or detergent inside and that it is
completely free of these. Other cleaning systems can be used
(ultrasound).
Antipulsations filter (HT part list No.11)
1. Empty the product from the equipment and perform the decompression procedure.
2. Unscrew the cover of the antipulsations filter.
3. Extract the product filter (HT part list No.03) and clean it with the suited solvent or replace it
if necessary.
4. Assemble the product filter.
5. Assemble, by tightening to the utmost, the cover of the antipulsations filter.
ENGLISH