Skil PWRCORE 20 Manual Del Propietário página 15

MAINTENANCE
WARNING
Service
WARNING
cause serious hazard . We recommend that all appliance service be performed by a SKIL
Factory Service Center or Authorized SKIL Service Station.
General Maintenance
WARNING
Periodically inspect the entire product for damaged, missing, or loose parts such as screws,
nuts, bolts, caps, etc. Tighten securely all fasteners and caps and do not operate this product
until all missing or damaged parts are replaced. Please contact customer service or an
authorized service center for assistance.
Cleaning
WARNING
compressed air. Ventilation openings and switch levers must be kept clean and free of
foreign matter. Do not attempt to clean by inserting pointed objects through openings.
WARNING
ammonia and household detergents that contain ammonia.
Storage
Store the appliance indoors in a place that is inaccessible to children. Keep away from
corrosive agents.
Protecting the environment
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection
facilities.
TROUBLESHOOTING
Problem
Fan cannot be
started.
Fan cannot be
stopped.
Fan blade makes
rattling sound
To avoid serious personal injury, always remove the battery pack from
the appliance when cleaning or performing any maintenance .
Preventive maintenance performed by unauthorized personnel may
result in misplacing of internal wires and components which could
When servicing, use only identical replacement parts . Use of any
other parts could create a hazard or cause product damage .
The appliance may be cleaned most effectively with compressed dry air.
Always wear safety goggles when cleaning appliances with
Certain cleaning agents and solvents damage plastic parts. Some of
these are: gasoline, carbon tetrachloride, chlorinated cleaning solvents,
Cause
Low battery pack capacity
or the USB cable is not
properly connected.
The battery pack or the fan
is too hot.
The fan is damaged.
Warped/damaged fan
enclosure is interfering with
the fan blade.
Remedy
Charge the battery pack or make sure the
USB cable is connected properly.
Turn off the fan and allow the fan and
battery pack to cool down.
Contact an authorized SKIL Service
Center or Service Station.
Contact an authorized SKIL Service
Center or Service Station.
15