Taurus AF1700D Instrucciones De Uso página 10

Downloaded by: pd-oliana on 11-08-2022 09:19 CEST
when it's hot.
Put the ingredients you want to fry inside the
basket (E)
Introduce the bowl inside the fryer.
Power on the appliance pressing the on/off
button (A1)
Adjust the temperature and time using the
according buttons, or select one of the 8 pre-
set modes.
Once you've done it, choose the right cooking
time with the Timer (A3) and the appliance will
start to work or take in mind the pre-set time
with the desired mode.
Press the on/off button again to start the
cooking.
Note: have in mind that if the appliance is cool
you should add 3 minutes to the cooking time.
Note: if you want to shake the ingredients, pull
the bowl out of the appliance by the handle
and shake it.
Once the cooking time reaches its end, pull out
the bowl outside the appliance. The appliance
will switch off automatically.
CAUTION: Bowl, basket and food will be very
HOT.
Place the bowl over a plain surface able to
work with high temperatures.
Split the basket from the bowl using the basket
release button (G) and turn the basket to take
off the fries, avoiding the risk of burns.
TIME AND TEMPERATURE
You can change the time and temperature by
using the ▲/▼ symbols according the buttons
(A2, A3)
PRE-SET PROGRAMS
This appliance has 8 pre-set programs.
To select a program, press the programs
button (A5). You can switch from one program
to the other by pressing
If you wish you can also change the
temperature and time settings for the pre-set
programs.
Once the program has been selected, press
the start button (A1) to start heating. You will
see that the timer will start running.
To change any settings while cooking, first
pause, modify and then resume.
NOTE: During the cooking phase, you can
this same button.
press the pause button (A1) to stop the
appliance, the timer will also stop and display
whatever time remains. Press this button again
to resume the cooking phase.
The fryer will beep when the cooking time has
finished.
Check to see that the food is cooked.
If it is not, you only have to put the container
back in the fryer and program the timer to cook
for a few more minutes.
Once cooking has finished, take the whole pan
part out of the appliance. The appliance will
switch itself off automatically.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
Unplug the appliance from the mains.
Let to cool down.
Clean the appliance as it is explained on the
cleaning section.
SAFETY THERMAL PROTECTOR:
The appliance has a safety device, which
protects the appliance from overheating.
If the appliance turns itself off and does not
switch itself on again, disconnect it from the
mains supply, and wait for approximately 15
minutes before reconnecting. If the machine
does not start again seek authorised technical
assistance.
CLEANING
Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
Do not use solvents, or products with an
acid or base pH such as bleach, or abrasive
products, for cleaning the appliance.
Never submerge the appliance in water or any
other liquid or place it under running water.
It is advisable to clean the appliance regularly
and remove any food remains.
If the appliance is not in good condition of
cleanliness, its surface may degrade and
inexorably affect the duration of the appliance's
useful life and could become unsafe to use.
Only the outer pan and frying basket are
suitable for cleaning in the dishwasher.
The draining/drying position of the articles