Descargar Imprimir esta página

Kohler K-30754-PA-HB1 Instrucciones De Instalación página 2

Publicidad

Idiomas disponibles

Idiomas disponibles

Thank You for Choosing KOHLER
Need help? Contact our Customer Care Center.
• USA/Canada: 1-800-4KOHLER (1-800-456-4537) Mexico: 001-800-456-4537
• Service parts:
kohler.com/serviceparts
• Care and cleaning:
kohler.com/clean
• Patents:
kohlercompany.com/patents
Important Information
WARNING: Risk of electric shock. Disconnect the power before servicing.
WARNING: Risk of electric shock. Connect only to a properly-grounded dedicated circuit protected by a Class A
Ground-Fault Circuit-Interrupter (GFCI)*. Use 120 V, 60 Hz, 15 A service. Do not remove the grounding pin or use a
grounding adapter.
CAUTION: Risk of personal injury. This product is heavy. Lift the toilet with two people, using proper lifting
technique.
CAUTION: Risk of hazardous gases. If the new toilet is not installed immediately, temporarily place a rag in the
floor flange.
CAUTION: Risk of property damage. This product is not intended to be installed where temperatures will drop
below 32°F (0°C). The design of the toilet makes it difficult to remove all water from the tank. If frozen, the water
could damage the tank resulting in leaking.
IMPORTANT! This product requires a minimum static pressure of 35 psi (241 kPa) for satisfactory rim wash
performance. Maximum static pressure is 80 psi (552 kPa).
IMPORTANT! Use the supply hose and valve provided with the product. Do not reuse a previously installed hose and
valve.
Follow all local plumbing and electrical codes.
Installation of a water-hammer arrestor is required.
*Outside North America, this may be known as a Residual Current Device (RCD).
1411744-2-E
2
Kohler Co.

Publicidad

loading