Publicidad
Idiomas disponibles
Idiomas disponibles
5. Secure the Toilet
Plug the power cord into the electrical outlet.
Wait for the nightlight to stop blinking, indicating that the start-up procedure is complete.
Press the flush button and let the toilet fully refill.
Check all connections for leaks, and make adjustments as needed.
Insert the bushing into the screw hole in the side of the toilet.
Insert the supplied screws into the screw holes.
NOTE: A ratchet style screwdriver should be used to tighten the screws due to their close proximity to the floor. It is
difficult to achieve enough force with a standard screwdriver, and there is a greater risk of stripping the screws when a
power driver is used.
Thread each screw into the mounting blocks. Tighten the screws evenly to maintain the correct toilet position.
Install the caps over the bushings.
Check the toilet to make sure it is level and does not rock.
Shim if necessary to level or eliminate rocking.
1411744-2-E
8
Flush Button
Kohler Co.
Publicidad
