universalblue UCEXTCC-18 Manual De Instrucciones página 22

3. INSTALLATION
Take out all the packing. If there is a safe film over the oven, tear it
off before use. Check carefully for damage. If any, immediately
notify dealer.
If the cooker hood does not have an assembled air vent, it must be
added to the cooker hood following below notes. Please, note that
following pictures only are only example and your model may be
slightly different.
To assemble the air vent, following steps must be considered:
Mount two half-parts (2) into the body (6)
•
A pin (3) should be top oriented
•
• The axis (4) should be inserted in the holes (5) on body;
• Repeat all the operations for the 2nd half-part
WALL-MOUNTING
INSTALLATION
22