4. USING YOUR COOKER HOOD
2. Push switch ①, then the lamp will be on; push switch ① to
1. Insert the power plug into the socket.
3. Push the switch ② into "I、II", the motor will be on "low、high"
"0"and the lamp will be off.
two speeds, push into "0", the motor will be off.
4. The power will be connected when pull out the front panel.
Conversely, the power will be automatically disconnected.
5. MAINTENANCE
Caution:
• Before carrying out maintenance or cleaning, the cooker
hood must be disconnected from the main power source.
Make sure the appliance is off and the plug has been
removed.
•
External surfaces are susceptible to scratches and abrasions,
therefore, follow the cleaning instructions to ensure that the
best possible result is obtained without damage.
Cleaning and maintenance must be carried out with the appliance
cold, especially during cleaning. Avoid the use of acid substances
(such lemon juice, vinegar, etc.) on surfaces.
Control
buttons
26