ADE BA 914 Instrucciones De Operación página 21

Start-up
Removing iso-strips
The batteries are already inserted on delivery and, for protection against premature
discharge, are provided with an iso-strip. In order to start up the scale, you must
remove the iso-strip.
The battery compartment is located on the underside of the device.
1. Push the locking tab towards the battery compartment cover and remove the
battery compartment cover.
2. Pull out the iso-strip.
3. Replace the battery compartment cover.
Choosing the unit of measurement
When the scales are delivered, the unit of measurement is set to "kg" as standard. The
measurement result can also be displayed in English units "lb" (pound) and "st lb" (stone
pound).
1. To switch on the scale, exert a little force on the weighing surface.
2. To select the desired unit of measurement, press repeatedly the UNIT button on the
back of the scale. Note the display.
Setting up the scale
− Place the scale on an even, firm and dry surface. Do not place the scale on a carpet.
This is how your body analyser scales work
Your new body analyser scales work using so-called BIA-technology (Bioelectric
Impedance Analysis). This involves an undetectable, completely harmless and weak
current flowing through your body.
The measurement takes place via sensors that are mounted on the weighing surface.
‚ The current flows relatively unhindered through the fluid contained in muscle
mass.
‚ In fat mass, the resistance is greater. This resistance is measured.
BA 914 body analysis scale
Start-up
21