Fanimation RADIUS LP7614LBN Manual Del Usuario página 13

NOTE: This step is applicable after the necessary wiring is completed.
1. Assemble canopy by rotating key slot in canopy over
shoulder screw in hanger bracket
the wires. Tighten shoulder screw. Fully assemble and
tighten second shoulder screw that was previously
removed. (Figure 1)
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the canopy
housing and not pinched between the housing and
the ceiling.
2. Securely attach and tighten the canopy screw cover
over the shoulder screws in the hanger bracket utilizing
the keyslot twist-lock feature. (Figure 2)
and care not to pinch
WARNING
13
Ceiling Canopy
Figure 1
Canopy Screw
Cover
Figure 2