Assa Abloy CMD Manual Del Usuario página 12

The best way to remove dust and dirt from the ASSA ABLOY CMD is to use water and a soft cloth or a sponge.
A gentle detergent may be used. To maintain the quality of the surface treatment, the surfaces should be cleaned
once/four months period. The cleaning should be documented. To avoid damages to the profiles the
brushes/weather stripping must be vacuum-cleaned weekly.
Do not expose windows, doors or profiles to alkalis. Both aluminium and glass are sensitive to alkalis.
Do not clean with high pressure water. Operator, programme selector and sensor may be damaged and
water may enter the profiles.
Do not use polishing detergent.
Do not scrub with materials like Scotch-brite, as this will cause mechanical damage.
12
FUNCTION AND VISUAL INSPECTION
11 10
4
8
6
5
CLEANING
Issue 2018-03-09
1
2
3
ILL-00226
5
7
12
Click!
9
1006492-en-3.0