Publicidad
Idiomas disponibles
Idiomas disponibles
Original User Manual 40V chainsaw C212_214_de_en_ita_fr_es_rev4
• Place the elongated hole of the saw rail on the stud bolt a and the guide bolt b on the chain
saw.
• Place the saw chain around the chain wheel.
• Tighten the chain tensioning wheel anti- clockwise to tension the chain.
The saw chain must not sag, but it should be possible to pull it 2-4
millimetres off the saw rail in the middle of the saw rail.
• Turn the saw chain by hand to check that it runs perfectly. It must slide
freely in the rail.
• Attach the chain guard. Tighten the handwheel to attach the rail and the
cover.
55
Publicidad
