FUXTEC E212C Manual De Instrucciones Original página 64

Original User Manual 40V chainsaw C212_214_de_en_ita_fr_es_rev4
Basic working technique
Risk of injury!
This section deals with the basic working technique when handling the power tool.
The information given here does not replace a specialist's extensive training and experience.
Avoid any work for which you are not adequately qualified! Imprudent handling of the power
tool may result in extremely serious to fatal injuries!
Sawing technique
Pull stroke sawing
With this technique, the underside of the saw rail saws from top to bottom
The saw chain pushes the power tool forwards away from the user. The power tool's front edge
forms a support that absorbs the forces that occur when sawing on the tree trunk.
In pull stroke sawing, the user has much more control over the power tool and can better avoid
kickbacks. Therefore this sawing technique should be used preferably.
Push stroke sawing
With this technique, the upper side of the saw rail saws from bottom to top.
64