FUXTEC E212C Manual De Instrucciones Original página 68

Original User Manual 40V chainsaw C212_214_de_en_ita_fr_es_rev4
Risk of injury!
Branches supported or under tension may wedge the saw chain in the wood!
Maintenance and care
WARNING!
Before performing any work on the garden tool, remove the battery.
Risk of injury by the sharp cutters! Wear protective gloves.
In the interest of your safety!
Perform only the maintenance work described here yourself. All other work, in particular motor
maintenance and repairs, must be performed by a trained specialist. Improper work may damage
the power tool and also result in injuries. Has the power tool been inspected once a year at a
service centre?
Overview of cleaning and maintenance
After using the power tool
• Clean the device.
Regularly, depending on the application conditions
• Tension the saw chain.
• Clean the oil guide groove in the saw rail.
• Regrind saw chain.
• Check saw chain oil level. Top up if required.
Cleaning
WARNING!
Do not use water or liquid detergents.
CAUTION!
Clean the device after every use. Failure to clean the device can damage the materials and cause
malfunctions.
• Clean the device with a damp cloth and a soft brush.
• Remove the chain cover, and then use a soft brush to remove debris from
the saw rail, saw chain, chain wheel and chain cover.
68