FUXTEC E212C Manual De Instrucciones Original página 66

Original User Manual 40V chainsaw C212_214_de_en_ita_fr_es_rev4
Risk of injury!
Never saw the tree trunk all the way through. The area (C) is used as a "hinge" and provides a
defined direction of fall. When felling, stand only at the side of the tree to be felled! There is a
risk of life- threatening injuries!
Trunks lying flat on the ground
• Cut halfway into the trunk, then turn around and saw through from the
opposite side.
Damage to power tool!
Ensure the saw rail does not touch the ground when sawing through the trunk!
Supported trunks
We recommend supporting trunks, which are to be sawn through on sawhorses. If this is not
possible, the trunk should be raised and supported with the aid of the supporting branches or via
support blocks.
• In area A, first cut approx. one-third of the trunk diameter from top to bottom,
66