FUXTEC E212C Manual De Instrucciones Original página 63

Original User Manual 40V chainsaw C212_214_de_en_ita_fr_es_rev4
That is how to use the saw correctly!
• Look over the working area and remove any obstructions.
• Before starting work, check the safety of the power tool (see "Before each
use").
• Pick up the power tool in both hands as specified.
• Switch the chain saw on before starting the cut.
• Apply uniform pressure to the device, however, not excessive force.
• If possible, place the device's tree claw on the branch to be sawn.
After use
Risk of injury!
Always switch the motor off before you put the power tool down! When the On/Off switch is
released, the saw chain continues running briefly.
• Stop the engine.
• Wait until all rotating parts have come to a standstill.
• Remove the battery.
• Place the sheath on the cutting mechanism.
• Activate chain brake.
• Leave the power tool to cool down.
63