Asist AE9CPZ80 Instrucciones De Uso página 43

Remove the drain pipe.
Unscrew the suction pipe (careful, this is full of water).
Drain it all.
Unscrew the check valve and flush with clean water.
Flush the suction tube with clean water.
Check that there is no standing water in the pipes.
Keep the pump, piping and non-return valve away
from freezing. Place the pump in a place where there
is no vibration.
CLEANING AND MAINTENANCE
The pump is basically maintenance-free. To ensure its
long life, we recommend regular inspection and care.
Notice!
Before any maintenance, remove the electrical plug
from the socket.
If you are not going to use the pump for a long time
or if you dismantle it during the winter months, rinse
it with water, empty it completely by unscrewing both
vent plugs and let it dry.
- If possible, store the device in a place with constant
temperature (5 - 35°C) and humidity.
AE9CPZ80 TECHNICAL DATA
Input voltage 230 V
Input frequency 50 Hz
Power consumption 800 W
Max. pumping capacity 3200 l/h
Max. discharge height 40 m
Max. liquid temperature 35 oC
Max. particle size 3 mm
Max. immersion depth 8 m
Weight 6.90 kg
Protection class I.
Degree of IP protection IPX4
Caution: The vibration level may vary during power
tool operation from the declared value depending on
the way the power tool is used and depending on
the following conditions: Method of power tool use
and type of material being cut or drilled, conditions
of the power tool and method of its maintenance,
appropriateness of the used accessories and ensur-
ing its sharpness and good conditions, the strength
of handle gripping, use of anti-vibration equipment,
suitability of the power tool for the purpose for which
it has been designed and compliance with workflows
according to manufacturer's instructions.
If this power tool is used in an inappropriate manner,
a hand/shoulder vibration syndrome may appear.
Caution: For clarification, it is necessary to consider
the level of vibrations in specific conditions of use in
all operating modes, e.g. the time when the power
tool is switched off except for the operation time,
and when it idles, i.e. performs no work. This may
substantially decrease the exposition level during the
whole operating cycle.
Minimize the risk of vibrations, use sharp chisels, drill
and blades.
Keepthe power toolin compliancewith theseinstruc-
tions and provide for its proper lubrication.
When using the power tool regularly, invest into anti-
vibration equipment.
Do not use the power tool under temperatures lower
than 10°C. Plan your project containing work with the
power tool producing high vibrations carefully and
spread it over more days.
Subject to changes.
ENVIRONMENTAL PROTECTIONWASTE
MANAGEMENT
Power tools, accessories and packaging should
be provided for recycling and not to harm the
environment.
Do not dispose of power tools into household waste!
According to Directive 2012/19/EU of the European
Parliament and of the Council on waste electrical and
electronic equipment (WEEE) and its approximation
in national laws, unfit power tools must be handed
over at the point of purchase of similar equipment, or
in available collection points designated for collection
and disposal of power tools. Such disposed power
tools will be collected, disassembled and delivered for
environment-friendly recycling.
WARRANTY
In the attached material, you will find our warranty
conditions.
Date of Manufacture
The date of manufacture is incorporated in the serial
number indicated on the product label.
The serial number has the format ORD-YY-MM-SERI
where ORD is the order number, YY is the year of
manufacture, MM is the month of manufacture, SERI
is the serial number of the product.
43