Barrette Privacy Vinyl Fence Kit Instrucciones De Instalación página 5

6.
Insert boards into bottom rail ensuring
U-channels are on both ends. Start from rst
installed post and work towards second post
(Fig. 7).
7.
For Full Privacy Panels:
Insert the top rail into the rst top hole post route
then guide over top of boards (Fig. 8).
Proceed to Step 15.
8.
For Lattice Top Panels:
Add the lattice insert over the top of the lattice
(Fig. 9).
Place lattice into the middle rail followed by the
top rail.
Top Rail
Lattice Insert
Middle Rail
Lattice
Fig. 7
Fig. 8
Fig. 9
5