Outsunny 840-239V00 Manual Del Usuario página 18

6.Installation notes
Move 'K' to a suitable position, ensuring the 'K' and the hole on the arm is in the
same vertical line. Then insert the arm-bar links to the holes on the end of both
arms.
7. Tighten the two screws and screw the nut with a wrench.
(Installation notes: Do not fully tighten the screw nut, leaving about 0.4cm space in
between).
Tip: If the screw nut is too tight, the arm will have no space - this can cause damage.
17